WitNet IES3009 Rail-Mounted Industrial Ethernet Switch

Product Introduction

WitNet IES3009 is a high-performance, managed industrial Ethernet switch developed by Beijing BoVIAX Technology Co., Ltd. specifically for industrial applications. Featuring a powerful switching engine, a robust and fully enclosed chassis design, and an efficient single-fin heat sink—designed without fans yet delivering exceptional cooling performance—the device also includes overcurrent, overvoltage, and EMC protection at the power input, along with superior EMC shielding on its RJ45 ports. These features enable the WitNet IES3009 to thrive in demanding and hazardous industrial environments. Additionally, the switch offers fiber-optic network redundancy and redundant power inputs, providing multiple layers of assurance for the system’s reliable operation.

Product Features

• Supports up to 9 100-Mbps interfaces, configurable as 4 fiber + 4 copper, 3 fiber + 6 copper, or 2 fiber + 6 copper. The 100-Mbps optical interfaces are available in SC, ST, FC, and LC options.
• Supports the IEC62439 MRP international standard ring network redundancy protocol, with redundancy protection time less than 20ms, supporting up to 200 nodes, and compatible with tangent-ring and coupling-ring networking configurations.
• Supports RSTP/STP/MSTP (IEEE 802.1w/d/s) redundancy protocols
• Flexible networking options allow for the creation of various topologies, including ring networks, chain networks, star networks, and tangent-ring configurations.
• Supports IGMP Snooping and GMRP for multicast packet filtering.
• Supports port-based VLAN, IEEE 802.1Q VLAN, and GVRP protocols, enabling seamless network management via QoS—IEEE 802.1p/1Q—and more.
• TOS/Diffserv Enhances Decision-Making Mechanism
• Supports SNMPv1/N2c/V3 for multi-level network management, and leverages RMON to enhance network monitoring capabilities.
• Bandwidth management optimization with precise broadcast storm control
• Port loop protection feature effectively prevents ring network storms.
• Built-in diagnostic features for convenient network fault analysis and troubleshooting
• Port locking allows access only to authorized MAC addresses.
• Supports robust ACL, with hardware-accelerated L2-L7 layer data filtering.
• Supports multi-port mirroring for online debugging
• Abnormal events automatically trigger an alarm via a relay.
• Product configuration and debugging can be performed via web browser, Telnet/SSH, or console.
• Superior electromagnetic compatibility and immunity compared to industrial-grade standards, ensuring reliable performance even in harsh electromagnetic interference environments.
• The power input level can be flexibly configured and selected, with redundant DC power inputs.
• Operating temperature: -40°C to +85°C
• DIN rail-mounted, wall-mountable installation
• IP40 Protection Rating

Product Specifications

Port

100-Megabit Ethernet Port: 10/100Base-T(X) Adaptive Ethernet RJ45 Interface

100-Megabit Optical Port: Optional SC/ST/FC/LC connectors

CONSOLE port: RJ45, with 4 optional RS232/RS485 ports

Alarm port: 3-pin, 3.81mm pitch, plug-in terminal

Technology

IEEE 802.3, IEEE 802.3u, IEEE 802.1d, IEEE 802.1w, IEEE 802.1p, IEEE 802.1q

Exchange attributes

Backplane switching bandwidth: 1.8 Gbps

MAC address table size: 8K

Buffer size: 1 Mbit

Packet forwarding rate: 1.34 Mpps

Exchange latency: <5 μs

Cables

Twisted Pair Cable: 0–100 m (using standard CAT5 or CAT5e network cables)

Multimode Fiber Optic: 1310 nm, 2 km (100 Mbps)

Single-mode fiber: 1310nm, 20 km / 40 km / 60 km (100 Mbps), 1550nm, 60 km / 80 km (100 Mbps)

Power supply

Input voltage: 24VDC (9–36VDC), 48VDC (18–72VDC), 110VDC (66–154VDC), 220VAC/DC

(85–264 VA / 100–370 VDC)

Connection terminals: 5-pin, 5.08mm pitch, plug-in type; Power rating <9.7W

Redundancy Protection: Supported

Mechanical Structure

Case: Textured Surface Cooling Technology, Fanless

Protection rating: IP40

Installation methods: DIN rail mounting or wall-mounting

Case dimensions (W × H × D): 69mm × 140mm × 125mm Weight: 1 kg (including packaging)

Environment

Operating temperature: -40°C to +85°C

Storage temperature: -40°C to +85°C

Relative humidity: 0–95%, non-condensing

Warranty

MTBF: 35 years

Warranty: 5 years

Meets the standards

IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-3 (RS): 10 V/m (80–1000 MHz)

IEC61000-4-4 (EFT): Power line: ±4 kV; Data line: ±2 kV

IEC61000-4-5 (Surge): Power line: ±4 kV/CM, ±2 kV/DM; Data line: ±2 kV

IEC61000-4-6 (RF Conducted Immunity): 3V (10 kHz–150 kHz), 10V (150 kHz–80 MHz)

IEC61000-4-8 (Power Frequency Magnetic Field): 100 A/m (continuous), 1000 A/m (1 to 3 seconds)

IEC61000-4-12/18 (Oscillatory Wave): 2.5 kV CM, 1 kV DM

IEC61000-4-10 (Damped Oscillation): 30 A/m

IEC61000-4-16 (Common-mode Conduction): 30 V (continuous), 300 V (1 s)

FCC CFR 47 Part 15 / EN 55022: Class A & B

IEC61000-6-2 (General Industrial Standard), IEC61850-3 (Substations), IEEE1613 (Power Substations), EN50121-4 (Railway Applications)

Dimensions (unit: mm)

Order Information