WitNet IES6012 Rail-Mounted Three-Port Industrial Ethernet Switch

Product Introduction

The WitNet IES6012 Industrial Ethernet Switch is a Layer 3 industrial Ethernet switch developed by Beijing Bowayaxun Technology Co., Ltd. It supports up to 8 100BASE-T (RJ45) electrical ports and features 4 1000BASE-X (SFP) optical interfaces. The switch offers a rich array of Layer 2 software features, including port management, VLANs, multicast, QoS, and Fast Redundant Ring, while also supporting multiple management methods such as CLI, Telnet, and Web interfaces, along with SNMP-based network management software. Additionally, it accommodates various Layer 3 routing protocols, including RIP V1/V2, OSPF v2, ISIS, and BGP v4. Designed specifically for industrial environments, this product undergoes rigorous selection of components to ensure exceptional stability and environmental adaptability. Its robust construction includes an aluminum alloy housing, making the device lightweight yet highly durable, resistant to corrosion, and better equipped to handle electromagnetic interference. These features collectively guarantee the switch’s reliability and safety in even the most demanding industrial settings.

Product Features

• Intelligent store-and-forward, line-rate non-blocking data switching
• 10/100M/1000M, Half/Full Duplex, MDI/MDI-X Adaptive
• Abundant all-Gigabit interfaces, supporting 1 optical and 4 electrical/5 electrical configurations.
• The power input level can be flexibly configured and selected.
• Plug and play
• Meets Industrial Level 4 electromagnetic compatibility requirements
• Operating temperature: -40°C to +85°C
• Rough-and-Flat Surface Cooling Technology, Fanless
• Meeting the stringent reliability requirements for demanding electrical environments
• IP40 protection rating, metal enclosure
• DIN rail-mounted or wall-mountable installation

Product Specifications

Port

100-Megabit Ethernet Ports: Supports 8 x 10/100BASE-T (RJ45) electrical interfaces

Gigabit Optical Ports: Up to 4 1000BASE-X (SFP) optical interfaces

CONSOLE port: RJ45

Alarm port: 3-pin terminal block with 3.81mm spacing

Technology

IEEE 1588v2, G.8261, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1d, IEEE 802.1w, IEEE 802.1w, IEEE 802.1p, IEEE 802.1q

Transmission method: Store-and-forward

Exchange attributes

Backplane switching bandwidth: 9.6 Gbps

MAC Address Table: 16K

Buffer Size: 12 Mbit

Packet forwarding rate: 7.14 Mpps

Exchange latency: <5 μs

Cables

Twisted Pair Cable: 0–100 m (using standard CAT5 or CAT5e network cables)

Multimode Fiber Optic: 1310nm, 2 km (100 Mbps), 850 nm, 550 m (1 Gbps)

Single-mode fiber: 1310nm, 20 km / 40 km / 60 km (100 Mbps)

1550nm, 60km / 80km (100 Mbps)

1310nm, 10km/40km (Gigabit), 1550nm, 60km/80km (Gigabit)

Power supply

Input voltage: 24VDC (9–36VDC), 48VDC (18–72VDC), 110/220VDC (88–300VDC), 220VAC/DC

(85–264 VAC, 100–370 VDC)

Connection terminals: 5-pin, 5.08mm pitch, plug-in type; Power rating <20W

Reverse connection protection: Supported

Redundancy Protection: Supported

Mechanical Structure

Case: Textured Surface Cooling Technology, Fanless

Protection rating: IP40

Installation methods: DIN rail mounting or wall-mounting

Case dimensions (W × H × D): 69mm × 140mm × 125mm

Weight: Less than 1.5 kg

Environment

Operating temperature: -40°C to +85°C

Storage temperature: -40°C to +85°C

Relative humidity: 0–95%, non-condensing

Warranty

MTBF: 35 years

Warranty: 5 years

Meets the standards

IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV airborne discharge IEC61000-4-3 (RS): 10V/m (80–1000 MHz)

IEC61000-4-4 (EFT): Power line: ±4 kV; Data line: ±2 kV

IEC61000-4-5 (Surge): Power line: ±4kV CM / ±2kV DM; Data line: ±2kV

IEC61000-4-6 (RF Conducted): 3V (10 kHz–150 kHz), 10V (150 kHz–80 MHz)

IEC61000-4-8 (Power Frequency Magnetic Field: 1100 A/m (continuous), 1000 A/m, (1s to 3s)); IEC61000-4-9 (Pulse Magnetic Field): 1000 A/m

IEC61000-4-10 (Damped Oscillation): 100 A/m

IEC61000-4-12/18 (Oscillatory Wave): 2.5 kV CM, 1 kV DM IEC61000-4-16 (Common-Mode Conduction): 30 V (continuous), 300 V (1 s)

FCC CFR 47 Part 15 / EN55022: Class A & B

IEC61000-6-2 (General Industrial Standard), IEC61850-3 (Substation), IEEE1613 (Power Substation)

EN50121-4 (Railway Applications)

Dimensions (unit: mm)

Order Information